10646300
4.5 TON UNIVERSAL HYDRAULIC BALL JOINT SPLITTER

The 4.5 Ton Universal Hydraulic Ball Joint Splitter is engineered to remove tapered ball joints quickly and cleanly without damaging the rubber boot or thread. It is equipped with two open jaw sizes and two pressing heights, enabling the correct configuration to suit the joint. The jaws can be repositioned by unscrewing the top nut, sliding the jaw assemblies off, and refitting them in reverse—allowing the hydraulic ram to operate from the top or bottom, depending on access requirements. For smaller joints or track rod ends, a sleeve is placed beneath the lower jaw to reduce the operating gap. A safety strap is included to prevent the tool from falling when the joint is released. The tool can also be used in reverse to press a joint back into place when the nut is seized and the taper spins freely. This tool operates with a hydraulic foot pump (80255560) or pneumatic pump (80255570) sold separately.

Two jaw sizes and pressing heights for adjustable use
Reversible jaw layout for better access
Sleeve insert for smaller joints and track rod ends
Supplied with safety strap
Compatible with hydraulic or pneumatic pump (not included)
002

Order here now
If you require any further information please call 01335 360759