9144650
Push and pull bush and bearing set 12.9 complete
Universal push/pull sleeve set for removing and installing bushes, ball bearings, shaft seals, hydraulic bearings, and similar press-fit components. Supplied with 4 high-strength spindles (grade 12.9 steel, tensile strength up to 1200 N/mm²) and an assortment of stepped discs and press sleeves to accommodate a wide range of diameters. All sleeves can be individually modified (e.g. notched) to suit application-specific requirements. Suitable for use with or without a workshop press.
36-piece kit
4 stepped discs:
Nr. 1: Ø34, 42, 50, 58, 66 mm
Nr. 2: Ø36, 44, 52, 60, 68 mm
Nr. 3: Ø38, 46, 54, 62, 70 mm
Nr. 4: Ø40, 48, 56, 64, 72 mm
4 spindles: M10, M12, M14, M16 (steel grade 12.9)
8 thrust nuts: 2× each M10, M12, M14, M16
20 press sleeves (ID/OD in mm):
34/44 to 72/82 in 2 mm increments
Set also available with 8.8 grade threaded spindles P/N (6176930)
002
36-piece kit
4 stepped discs:
Nr. 1: Ø34, 42, 50, 58, 66 mm
Nr. 2: Ø36, 44, 52, 60, 68 mm
Nr. 3: Ø38, 46, 54, 62, 70 mm
Nr. 4: Ø40, 48, 56, 64, 72 mm
4 spindles: M10, M12, M14, M16 (steel grade 12.9)
8 thrust nuts: 2× each M10, M12, M14, M16
20 press sleeves (ID/OD in mm):
34/44 to 72/82 in 2 mm increments
Set also available with 8.8 grade threaded spindles P/N (6176930)
002
Order here now
If you require any further information please call 01335 360759
