91469620
GUIDE SLEEVE SET FOR MOUNTING GENERATION 2 WHEEL BEARINGS (6 PCS)
This new 6-piece guide sleeve set ensures accurate alignment when pressing in new Generation 2 wheel bearings. By keeping the bearing true during the initial phase of installation, it effectively minimises the risk of the bearing pulling sideways under load.
Designed for use with the Generation 2 wheel bearing tool kit
Supports correct axial pressing by aligning the bearing during insertion
Threaded central guide tube interface – ensures stable and centred installation
Suitable only for top bridges with a centre screw thread
If your bridge lacks a threaded centre, use updated bridge PN: 91034505
We recommend using the larger M20 spindle and nut (91471320), which allows less sideways movement inside the guide tube compared to the standard M18 spindle
002
Designed for use with the Generation 2 wheel bearing tool kit
Supports correct axial pressing by aligning the bearing during insertion
Threaded central guide tube interface – ensures stable and centred installation
Suitable only for top bridges with a centre screw thread
If your bridge lacks a threaded centre, use updated bridge PN: 91034505
We recommend using the larger M20 spindle and nut (91471320), which allows less sideways movement inside the guide tube compared to the standard M18 spindle
002
